Guides · November 13, 2026

How to replace a broken plastic part with 3D printing

If a plastic part has snapped and the maker no longer sells it, it can usually be 3D printed. You do not need a 3D file or a part number. A few photos and some measurements, or the broken part itself, are enough for us to quote it.

This guide covers which parts are good candidates, what to send, what it costs and how long it takes.

Which parts can be 3D printed

Good candidates are rigid or flexible plastic parts that do a simple mechanical job:

  • knobs, handles and caps
  • clips, latches and hooks
  • brackets, mounts and spacers
  • covers, bezels and battery doors
  • feet, bumpers and grommets

Parts we will tell you not to print:

  • Anything safety-critical. Our prints are not certified for uses where a failure could hurt someone.
  • Food-contact or medical parts. Our prints are not certified for either.
  • Parts that sit against high heat, such as inside an oven or next to an engine exhaust.
  • Clear parts that need to look like glass. Printed plastic shows layer lines.

If you are not sure, send it anyway. Telling you it will not work costs you nothing.

What to send

You can send any one of these. More is better.

  1. Photos. Take the part from the front, the side and the top, on a plain background. Include a photo of where it fits.
  2. Measurements. Put a ruler or a set of calipers in the photos, or write down the length, width, height and any hole sizes in millimeters.
  3. The broken part. If you are near Kyle, Buda, San Marcos or Austin, you can hand it over in person. Even in pieces, it is the best reference.
  4. A file, if you have one. We take STL, 3MF, STEP, OBJ and IGES, plus PDF drawings.

Tell us what the part does and what broke. If it snapped at a thin spot, we can thicken that spot in the new one.

Choosing the plastic

You do not have to choose. Tell us where the part lives and we will recommend one.

Plastic Good for
PLA Indoor parts, display pieces and prototypes
PETG Functional parts, brackets and fixtures that need to be tougher
ASA Outdoor parts and automotive trim, because it resists sun and weather
TPU Flexible parts such as grips, bumpers, seals and gaskets

How close will it be to the original

Our standard accuracy is about plus or minus 0.5 mm on most features. That is fine for most knobs, clips and covers. For a part that has to snap into place or slide on a shaft, tell us which dimensions matter and we will orient the print around them.

A printed part will not look molded. You will see fine layer lines, and it may be a slightly different shade than the original.

What it costs

A replacement part has two costs:

  • Design. If there is no file, we model the part. Design is $50 an hour, and we quote the hours before any work starts. A simple part usually takes one to two hours. Two rounds of changes are included.
  • Printing. This depends on the size of the part and how many you want. Quoted custom jobs have a $75 minimum.

Design is paid once. If you order the same part again later, you pay for printing and setup only.

If you already have an STL file, skip the design step and get a price right away with the instant quote tool.

How long it takes

We reply to quote requests within one business day. The quote gives a lead time for your job. A 50% deposit starts the work, and the balance is due when you pick the part up, or before it ships.

Questions people ask

Can you copy a part with a logo or a brand name on it? We can make a part that fits and works the same way. We will not reproduce another company’s trademark or protected design without permission.

Do I get the 3D file? We keep the design files we create and supply finished parts. File release is available on request.

Can I order just one? Yes. One-off replacement parts are a normal job for us.

What if the first one does not fit? Tell us what is off. Design quotes include two rounds of changes, and we correct our own mistakes at no charge.

Do you ship? Yes, anywhere in the United States. Local customers around Kyle, Buda, San Marcos and Austin can arrange a handoff in person.

Get a quote for your part

Send photos and a short description through the quote form. We will reply within one business day with a price and a lead time.

All guides